Brand | Family | Model | Year |
---|---|---|---|
BMW | R Boxer 2V | R 100 - 0425 | 1980-1983 |
BMW | R Boxer 2V | R 100 CS - 0426 | 1980-1984 |
BMW | R Boxer 2V | R 100 GS - 0473 | 1986-1989 |
BMW | R Boxer 2V | R 100 GS Paris Dakar - 0474 | 1989-1990 |
BMW | R Boxer 2V | R 100 GS Paris Dakar - 0484 | 1990-1996 |
BMW | R Boxer 2V | R 100 GS/2 - 0483 | 1990-1994 |
BMW | R Boxer 2V | R 100 R Mystic - 0493 | 1993-1996 |
BMW | R Boxer 2V | R 100 R Roadster - 0486 | 1991-1996 |
BMW | R Boxer 2V | R 100 RS - 0427 | 1981-1984 |
BMW | R Boxer 2V | R 100 RS Monolever - 0459 | 1986-1992 |
BMW | R Boxer 2V | R 100 RT - 0446 | 1981-1984 |
BMW | R Boxer 2V | R 100 RT Monolever - 0455 | 1987-1996 |
BMW | R Boxer 2V | R 45 N - 0355 | 1981-1985 |
BMW | R Boxer 2V | R 45 S - 0354 | 1981-1985 |
BMW | R Boxer 2V | R 65 - 0358 | 1981-1985 |
BMW | R Boxer 2V | R 65 GS - 0482 | 1987-1992 |
BMW | R Boxer 2V | R 65 LS - 0359 | 1981-1985 |
BMW | R Boxer 2V | R 65 Monolever - 0451 | 1985-1993 |
BMW | R Boxer 2V | R 65 Monolever - 0452 | 1985-1988 |
BMW | R Boxer 2V | R 80 GS Monolever - 0346 | 1980-1987 |
BMW | R Boxer 2V | R 80 GS Monolever Paris Dakar - 0346 | 1984-1987 |
BMW | R Boxer 2V | R 80 GS Paralever - 0471 | 1987-1990 |
BMW | R Boxer 2V | R 80 GS Paralever Paris Dakar - 0472 | 1990 |
BMW | R Boxer 2V | R 80 GS Paralever Paris Dakar - 0485 | 1990-1993 |
BMW | R Boxer 2V | R 80 GS/2 Paralever - 0481 | 1990-1995 |
BMW | R Boxer 2V | R 80 Monolever - 0453 | 1984-1993 |
BMW | R Boxer 2V | R 80 R - 0467 | 1991-1994 |
BMW | R Boxer 2V | R 80 RT - 0444 | 1982-1984 |
BMW | R Boxer 2V | R 80 RT/2 Monolever - 0457 | 1984-1995 |
BMW | R Boxer 2V | R 80 ST - 0347 | 1982-1985 |
Hall sensor suitable foor several BMW R Boxer 2V models produce from 1981 onwards: failure of the hall sensor is quite common after all these years and the replacement assembly is no longer available from BMW. This is a direct replacement and it includes the grommet, wiring and connector: this repair kit is the best way to reignite your boxer! To install, remove the two screws and then the cover of your hall sensor canister. Remove the large outer clip and then the small clip on the shaft to remove the rotor: then remove the screws on the side of the canister to release the defective hall sensor and install the new part. Reassemble in reverse order.
Your question has been forwarded to our staff, we will notify as soon as will respond to your question.
Since 2011 - OFFICINE 08 S.r.l. - Via Aurelia Sud, 14 Int.12 - 55045 Pietrasanta (LU) - P.i.: 02246550467 - Numero Rea: LU-209626